LANGUAGE:
Choose a language Choose a language

Euro Hexsert® / Hexsert®

Inserts with hexagonal body, providing high torque-to-turn and pull-out performance, particularly in soft metals.

Overview

The Avdel Hexsert provides a blind threaded insert with a hexagonal body, providing high torque-to-turn and pull-out performance, particularly in soft metals. The Hexsert can be used in very thin materials with quick and easy insertion and includes a near flush version.

Key features and benefits

  • Hexagonal section and bore improves torque-to-turn by up to 200% in sheet metal compared to round body inserts
  • Superior pull-out performance
  • Can be used for very thin sheet materials from 0.50mm (0.02")
  • Double diameter body and lead-in chamfer provide easy insertion into hole
  • Access needed from only one side of the application, for high speed assembly
  • Provide a female thread in application
  • Can be installed in pre-coated or post painted applications without damaging the surface
  • Clamp two or more sheets
  • Various platings available to increase corrosion resistance
  • Low profile head allows near flush fit to application and clamps two or more sheets of material together, within the grip range
  • Large flange head provides a load bearing surface and reinforces the hole to prevent push-out. Can be used as a spacer and can be supplied with an underhead seal.
  • Closed end prevents the ingress of dirt and fluids into thread and electrical circuits
  • High strength option available for use with metric bolts and screws up to Property Class 12.9
  • Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods

Assembly applications

  • Automotive chassis components
  • Electrical engineering
  • Sheet metal
  • Domestic appliances
  • Switchgear cabinets
  • Thermal applications

Specifications

  • Thread Sizes: M3-M10
  • Material: Steel, stainless steel
  • Finishes Steel: Zinc plated and clear trivalent passivated
  • Headforms: Low profile and large flange
  • Option: Closed end
  • Hole Size: Metric and imperial options
Euro Hexsert®/Hexsert® - Technical Data Sheets
Material Headform Series No.
Steel Low Profile
Low Profile
Large Flange
Large Flange, Closed End
Euro Hexsert® 39101
Hexsert® 9688
Hexsert® 9498
Euro Hexsert® 49141
Stainless Steel Low Profile Euro Hexsert® 39102

 

Surface finish options

If you are looking for other surface finish options than shown in the above datasheets please download our
>>> Surface Finishes and Fastener Matrix for Threaded Inserts
.
This will show you what surface finish options are possible to apply to our standard fastener types as "customer specials".
 
Customised Designs
We can design and manufacture threaded inserts with a wide variety of forms and finishes to meet your unique assembly requirements. Please refer to this page to find examples of our customised capabilities:
>>> Threaded Inserts - Customised Designs

 

Additional Series Animations:
Hexsert® 9498 - Steel, Large Flange
Hexsert® 9688 - Steel, Low Profile
Euro Hexsert® 49141 - Steel, Large Flange, Closed End

Installation Equipment

Below mentioned you will find examples of Avdel® handtools and installation equipment which can be used to place Euro Hexsert® / Hexsert® inserts.

Tool Selection
Follow this link to find the tools suitable for your threaded insert:
>>> Placing Capablity Threaded Inserts Tools


Nose Equipment Selection
Follow this link to find the correct nose equipment for your breakstem fastener:
>>> Nose Equipment for Threaded Inserts Tools


For further information on specific nose equipment, please contact your local Avdel® representative or use our tool manuals:
>>> Tool Manuals

Alternative Products

High Strength Hexsert®
High strength Hexsert® provides clamp force comparable to weld nuts and clinch nuts in high torque applications.

Squaresert®
Steel, inserts with square body, providing very high torque-to-turn and pull-out performance in all materials.

Complementary Information

74290 tool for hexagonal hole production
The 74290 tool compliments and extends the range of Avdel hand tools for installing threaded inserts, by offering the capability of producing hexagonal holes for threaded Hexsert® inserts into materials where access is only possible from one side. The 74290 tool allows customers to benefit from the non-rotational properties of hexagonal inserts compared with round inserts. This is achieved by drilling a round hole, then inserting the 74290 tool and forming a hex hole.

>>> Flyer 74290

>>> 74290 Equipment

74290
74290

Automation Equipment
Avdel® can offer a wide range of semi and fully automated installation equipment to suit our customers’ requirements.

Euro Hexsert / Hexsert® Part Numbers

09688-70310 09688-70413 09688-70514 09688-70619 09688-70821 09688-72619 09688-72821 09498-70415 09498-70516 09498-70620 09498-72026 09498-72235 09498-72516 09498-72823 09498-72826 39101-70035 39101-74020 39101-75030 39101-76030 39101-76055 39101-78030 39101-78055 39102-26030 39102-26055 49141-76030 49141-78030