Eurosert®
Inserts designed to provide load bearing threads in thin sheet materials. For hard metric hole sizes.
Overview
The Avdel Eurosert® threaded insert is designed to provide load bearing threads in thin sheet materials. The splined body gives the insert high torque-to-turn resistance in softer materials whilst the large flange head provides a greater load bearing surface and reinforces the hole to prevent push out
Key features and benefits
- Can be used in very thin sheet materials from 0.25mm (0.01")
- Double diameter body and lead-in chamfer provide easy insertion into hole
- Access needed from only one side of the application, for high speed assembly
- Provide a female thread in application
- Can be installed in pre-coated or post painted applications without damaging the surface
- Clamp two or more sheets
- Various platings available to increase corrosion resistance
- Splined body improves torque-to-turn by up to 50% in soft materials compared to plain body inserts and improve electrical continuity in sheet metal fixings
- Low profile head allows near flush fit to application and clamps two or more sheets of material together, within the grip range
- Large flange head provides a load bearing surface and reinforces the hole to prevent push-out. Can be used as a spacer and can be supplied with an underhead seal.
- Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods
Assembly applications
- Automotive
- Electrical engineering
- Electronic components
- Sheet metal
- Domestic appliances
- General light fabrication
Specifications
- Thread Sizes: M3-M10
- Material: Steel, stainless steel
- Headforms: Low profile and large flange
- Body: With or without splines
- Hole Size: Metric
Eurosert® - Technical Data Sheets | ||
Material | Headform | Series No. |
Steel | Low Profile | |
Stainless Steel | Low Profile | |
Installation Equipment
Tool Selection
Follow this link to find the tools suitable for your threaded insert:
>>> Placing Capablity Threaded Inserts Tools
Nose Equipment Selection
Follow this link to find the correct nose equipment for your breakstem fastener:
>>> Nose Equipment for Threaded Inserts Tools
For further information on specific nose equipment, please contact your local Avdel® representative or use our tool manuals:
>>> Tool Manuals
Alternative Products
Euro Hexsert® / Hexsert®
Inserts with hexagonal body, providing high torque-to-turn and pull-out performance, particularly in soft metals.
Eurosert® Part Numbers
09408-72028 09408-72031 09408-72314 09408-72415 09408-72417 09408-72517 09408-72520 09408-72621 09408-72623 09408-72822 09408-72825 39002-24030 39002-25030 39006-70035 39006-74020 39006-75030 39006-76030 39006-76055 39006-78035 39006-78060