Supersert®
Steel inserts designed to provide load bearing threads in very thick materials and blind holes.
Overview
The Avdel Supersert® threaded insert is designed to provide load bearing threads in thick materials and blind holes. The Supersert rivet nut features a mechanical locking mechanism for applications requiring a higher push and pull out resistance. The Supersert insert can be installed with high speed assembly to coated applications without damaging the surface.
Key features and benefits
- Not grip sensitive. Can be used in thick materials from 0.8mm (0.03"), including blind holes
- Mechanical locking mechanism for applications requiring higher resistance to push out and pull out
- Access needed from only one side of the application, for high speed assembly
- Provide a female thread in application
- Can be installed in pre-coated or post painted applications without damaging the surface
- Low profile head allows near flush fit to application
Assembly applications
- General light fabrication in thick materials where other inserts are unsuitable
Specifications
- Thread Sizes: M3-M8
- Material: Steel
- Finishes: Zinc plated and clear trivalent passivated
- Headform: Low profile
- Hole Size: Imperial and metric
Supersert® - Technical Data Sheets | ||
Material | Headform | Series No. |
Steel | Low Profile | |
Installation Equipment
The tables below show examples of Avdel® handtools and installation equipment which can be used to place Supersert® fasteners. For further information on specific nose equipment, please contact your local Avdel® representative.
Alternative Products
Eurosert®
Steel inserts designed to provide load bearing threads in thin sheet materials. For hard metric hole sizes.
