Thin Sheet Nutsert®
Inserts designed to provide load bearing threads in thin sheet materials.
Overview
The Avdel Thin Sheet Nutsert® is a blind threaded insert designed to provide load bearing threads in thin sheet materials. The large flange version gives the Thin Sheet Nutsert rivet nut a greater load bearing surface whilst a closed end prevents the ingress of dirt and fluids into the thread and electrical circuits.
Key features and benefits
- Can be used in very thin sheet materials from 0.50mm (0.02")
- Access needed from only one side of the application, for high speed assembly
- Provides a female thread in application
- Can be installed in pre-coated or post painted applications without damaging the surface
- Various platings available to increase the corrosion resistance
- Low profile head allows near flush fit to application and clamps two or more sheets of material together, within the grip range
- Large flange head provides a load bearing surface and reinforces the hole to prevent push-out. Can be used as a spacer and can be supplied with an under-head seal
- Closed end prevents the ingress of dirt and fluids into thread and electrical circuits
- Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods
Assembly applications
- Automotive
- Electrical engineering
- Electronic components
- Sheet metal
- Domestic appliances
- General light fabrication
Specifications
- Thread Sizes: M3-M10
- Materials: Steel, stainless steel, aluminium
- Finishes steel: Zinc plated and clear trivalent passivated
- Headforms: Low profile, countersunk and large flange
- Option: Closed end
- Hole Size: Mainly imperial. Soft metric for large flange options
Thin Sheet Nutsert® - Technical Data Sheets | ||
Material | Headform | Series No. |
Steel | Low Profile | Thin Sheet Nutsert® 9658 |
Stainless Steel | Low Profile | |
Aluminium Alloy | Low Profile | Thin Sheet Nutsert® GM17 |
Installation Equipment
Tool Selection
Follow this link to find the tools suitable for your threaded insert:
>>> Placing Capablity Threaded Inserts Tools
Nose Equipment Selection
Follow this link to find the correct nose equipment for your breakstem fastener:
>>> Nose Equipment for Threaded Inserts Tools
For further information on specific nose equipment, please contact your local Avdel® representative or use our tool manuals:
>>> Tool Manuals
Alternative Products
Eurosert®
Inserts designed to provide load bearing threads in thin sheet materials. For hard metric hole sizes.
Complementary information
Imperial TSN® & Nutsert® datasheets :
Thin Sheet Nutsert® Part Numbers
09468-00310 09468-00413 09468-00514 09468-00619 09468-01023 09468-05821 09658-70310 09658-70413 09658-70514 09658-70619 09658-72022 09658-72619 09658-75821 0FS38-70418 0FS38-70626 0FS38-72418 0FS38-72521 0FS38-72626 0FS38-72829 0FS58-70628 0FS58-72421 0FS58-72522 0FS58-72628 0FS58-72832