LANGUAGE:
Choose a language Choose a language

Thin Sheet Nutsert®

Inserts designed to provide load bearing threads in thin sheet materials.

Overview

The Avdel Thin Sheet Nutsert® is a blind threaded insert designed to provide load bearing threads in thin sheet materials. The large flange version gives the Thin Sheet Nutsert rivet nut a greater load bearing surface whilst a closed end prevents the ingress of dirt and fluids into the thread and electrical circuits.

 

Key features and benefits

  • Can be used in very thin sheet materials from 0.50mm (0.02")
  • Access needed from only one side of the application, for high speed assembly
  • Provides a female thread in application
  • Can be installed in pre-coated or post painted applications without damaging the surface
  • Various platings available to increase the corrosion resistance
  • Low profile head allows near flush fit to application and clamps two or more sheets of material together, within the grip range
  • Large flange head provides a load bearing surface and reinforces the hole to prevent push-out. Can be used as a spacer and can be supplied with an under-head seal
  • Closed end prevents the ingress of dirt and fluids into thread and electrical circuits
  • Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods

Assembly applications

  • Automotive
  • Electrical engineering
  • Electronic components
  • Sheet metal
  • Domestic appliances
  • General light fabrication

Specifications

  • Thread Sizes: M3-M10
  • Materials: Steel, stainless steel, aluminium
  • Finishes steel: Zinc plated and clear trivalent passivated
  • Headforms: Low profile, countersunk and large flange
  • Option: Closed end
  • Hole Size: Mainly imperial. Soft metric for large flange options
Thin Sheet Nutsert® - Technical Data Sheets
Material Headform Series No.
Steel Low Profile
Low Profile, Closed End
Large Flange, Closed End
Thin Sheet Nutsert® 9658
Thin Sheet Nutsert® FS38
Thin Sheet Nutsert® FS58
Stainless Steel Low Profile Thin Sheet Nutsert® 9468
Aluminium Alloy Low Profile
Large Flange
Large Flange, Closed End
90° Countersunk
90° Countersunk, Closed End
Thin Sheet Nutsert® GM17
Thin Sheet Nutsert® FW78
Thin Sheet Nutsert® GM68
Thin Sheet Nutsert® FW96
Thin Sheet Nutsert® GM57

 

Surface finish options

If you are looking for other surface finish options than shown in the above datasheets please download our
>>> Surface Finishes and Fastener Matrix for Threaded Inserts
.
This will show you what surface finish options are possible to apply to our standard fastener types as "customer specials".
 
Customised Designs
We can design and manufacture threaded inserts with a wide variety of forms and finishes to meet your unique assembly requirements. Please refer to this page to find examples of our customised capabilities:
>>> Threaded Inserts - Customised Designs

 

Additional Series Animations:
Nutsert® FS38 - Steel, Low Profile, Closed End
Nutsert® FS58 - Steel, Large Flange, Closed End
Nutsert® FW78 - Aluminiium, Large Flange
Nutsert® FW96 - Aluminium, Countersunk
Nutsert® GM57 - Aluminium, Countersunk, Closed End

Installation Equipment

The tools below show some Avdel® handtools and installation equipment that can be used to place Nutsert® series inserts. For further information on specific nose equipment, please contact your local Avdel representative.

Tool Selection
Follow this link to find the tools suitable for your threaded insert:
>>> Placing Capablity Threaded Inserts Tools


Nose Equipment Selection
Follow this link to find the correct nose equipment for your breakstem fastener:
>>> Nose Equipment for Threaded Inserts Tools


For further information on specific nose equipment, please contact your local Avdel® representative or use our tool manuals:
>>> Tool Manuals

Alternative Products

Eurosert®
Inserts designed to provide load bearing threads in thin sheet materials. For hard metric hole sizes.

Complementary information

Imperial TSN® & Nutsert® datasheets :

Nutsert_TSN_9654_9655_9665

Standard_Nutsert_9504_9505

Thin Sheet Nutsert® Part Numbers

09468-00310 09468-00413 09468-00514 09468-00619 09468-01023 09468-05821 09658-70310 09658-70413 09658-70514 09658-70619 09658-72022 09658-72619 09658-75821 0FS38-70418 0FS38-70626 0FS38-72418 0FS38-72521 0FS38-72626 0FS38-72829 0FS58-70628 0FS58-72421 0FS58-72522 0FS58-72628 0FS58-72832